I just figured a exterior front door job. What I would like to impose on
this
great bunch of Groop is just a quick, rough estimate of what you think the
cost should be on this project. Following are the steps I will be taking.
The
exterior side of the door is oak and the interior side is pine, both will be
refinished as per original. There are 2 doors 8' by 39" each. I also
will be
doing a first class job, that is why they contacted me for the job. Travel
time will be next to nill. They are about 4 minutes of the beaten track.
The
pictures I am sending aren't the best ,I couldn't get far enough back for my
camera to get a good shot but I hope they will suffice. They are of both
the
pine and oak side. I would like to thank in advance any and everyone that
is
willing to take the time to do this.
Thanks again
Steve Phipps
Port Huron, Mich.
Remove doors & board up opening
Remove hardware (I will be leaving all glass intacked)
Strip complete door
Sand complete door & prep for stains ( No foreseen repair)
Stain both sides as per original
Finish coat exterior side with best quality spar varnish (3 to 4 coats)
Finish coat interior side probably with pre-cat lacquer
Clean up hardware a little
Reassemble, remove board-up & hang
