Frank LaRoque writes:
Shown are the mount parts for KevinH's Electric Player Piano.
Cut to shape with my band saw with a 3/16" x 14 tooth wood cutting blade.
They are solid brass and you can see
that the edges were routed with a 1/4" round over bit.
Yes, a wood working router with a two flute carbide bit.
One word of caution, make VERY little passes.
Smoothed with 220 sandpaper and buffed with jeweler's rouge
on a high speed grinder, (3450rpm) and a 8" semi-rigid cotton wheel.
One was left rough so you could see the chatter marks left by the router.
....LaRoque Onthe Loose....
