RonJ writes:
Here are the pictures of the swinging/rotating lift
that I use in my strip room.
I apologize for the poor quality of the first two pictures
but think that you'll get the general idea of how it works.
This shows the lift lowered to the floor
and an item placed on it.
Sorry for the small item but it was close by.
The lift will handle a 5 drawer dresser in height.
This shows the lift raised up and swung over the flow-over tray
The item could then be lowered into the tray and stripped.
The lift table is made from expanded metal so everything flows thru it.
Here's the lift pivoted over to the strip tank ready for rinsing.
The lift rotated 180 degrees so that all sides
can be washed off without touching the furniture item.
This narrative sounds clear to me but then I built it;
if you have any questions, ask away.
RonJ
swinging and rotating in TX